Gerrit review authentication error

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
13 messages Options
Reply | Threaded
Open this post in threaded view
|

Gerrit review authentication error

Ali Raza-2
  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Luca Milanesio


On 10 Mar 2021, at 13:31, Ali Raza <[hidden email]> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/3DC2EBFC-554C-4676-BB28-EA3618C6AC60%40gmail.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Ali Raza-2
Yes, I have added SCM credentials to my pipeline settings. Inside repository URL I also have ''/a/'' prefix. 

Do i need to add SSH keys which I have added to 'gerrit trigger' plugin settings somewhere inside Gerrit server?


On Wednesday, 10 March 2021 at 15:19:15 UTC+1 [hidden email] wrote:

On 10 Mar 2021, at 13:31, Ali Raza <[hidden email]> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/92a69011-4126-43cb-b8fe-7df9dbaa7328n%40googlegroups.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Luca Milanesio


On 10 Mar 2021, at 14:35, Ali Raza <[hidden email]> wrote:

Yes, I have added SCM credentials to my pipeline settings. Inside repository URL I also have ''/a/'' prefix. 

Cool, and you confirm that the clone works as expected.


Do i need to add SSH keys which I have added to 'gerrit trigger' plugin settings somewhere inside Gerrit server?

Why do you use the Gerrit Trigger plugin? Isn’t this a multi-branch pipeline?

Luca.



On Wednesday, 10 March 2021 at 15:19:15 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 13:31, Ali Raza <alira...@...> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-use...@....
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/92a69011-4126-43cb-b8fe-7df9dbaa7328n%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/E810633F-1943-4AD9-A0F7-8A089D728E46%40gmail.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Ali Raza-2
Yes, it is triggering on gerrit code changes and cloning the repository as well but when it is trying to execute ' gerritReview' command. The code inside my pipeline script where i am having problem is gerritReview labels: ['Unit-test': 1]

It is a plain pipeline job not a multibranch pipeline.



On Wed, Mar 10, 2021 at 3:39 PM Luca Milanesio <[hidden email]> wrote:


On 10 Mar 2021, at 14:35, Ali Raza <[hidden email]> wrote:

Yes, I have added SCM credentials to my pipeline settings. Inside repository URL I also have ''/a/'' prefix. 

Cool, and you confirm that the clone works as expected.


Do i need to add SSH keys which I have added to 'gerrit trigger' plugin settings somewhere inside Gerrit server?

Why do you use the Gerrit Trigger plugin? Isn’t this a multi-branch pipeline?

Luca.



On Wednesday, 10 March 2021 at 15:19:15 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 13:31, Ali Raza <[hidden email]> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/92a69011-4126-43cb-b8fe-7df9dbaa7328n%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/E810633F-1943-4AD9-A0F7-8A089D728E46%40gmail.com.


--
Regards

Ali Raza Alvi
Software Engineer
Contact No. +46793456480

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/CAPAq%2Bztp9Ou7dRaSAmqOdMVAL5xESbUWrA%3D31gJ34R2vFz7QNQ%40mail.gmail.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Luca Milanesio


On 10 Mar 2021, at 14:58, Ali Raza <[hidden email]> wrote:

Yes, it is triggering on gerrit code changes and cloning the repository as well but when it is trying to execute ' gerritReview' command. The code inside my pipeline script where i am having problem is gerritReview labels: ['Unit-test': 1]

It is a plain pipeline job not a multibranch pipeline.

Gotcha, that isn’t really the use-case that the Gerrit Code Review plugin has been designed for.

There are some environment variables that the plugin expects to be set:

As you can see, the list is quite big :-(
All of them are automatically set when you run in a multi-branch pipeline, otherwise you may need to set them manually.

I know that the Gerrit Trigger Plugin sets some of them, but you should cross-check them.

HTH

Luca.




On Wed, Mar 10, 2021 at 3:39 PM Luca Milanesio <[hidden email]> wrote:


On 10 Mar 2021, at 14:35, Ali Raza <[hidden email]> wrote:

Yes, I have added SCM credentials to my pipeline settings. Inside repository URL I also have ''/a/'' prefix. 

Cool, and you confirm that the clone works as expected.


Do i need to add SSH keys which I have added to 'gerrit trigger' plugin settings somewhere inside Gerrit server?

Why do you use the Gerrit Trigger plugin? Isn’t this a multi-branch pipeline?

Luca.



On Wednesday, 10 March 2021 at 15:19:15 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 13:31, Ali Raza <[hidden email]> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/92a69011-4126-43cb-b8fe-7df9dbaa7328n%40googlegroups.com.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/E810633F-1943-4AD9-A0F7-8A089D728E46%40gmail.com.


--
Regards

Ali Raza Alvi
Software Engineer
Contact No. +46793456480

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/56E2C165-24D1-4CCB-B2EF-B3672DAA01F0%40gmail.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Luca Milanesio


On 10 Mar 2021, at 15:02, Luca Milanesio <[hidden email]> wrote:



On 10 Mar 2021, at 14:58, Ali Raza <[hidden email]> wrote:

Yes, it is triggering on gerrit code changes and cloning the repository as well but when it is trying to execute ' gerritReview' command. The code inside my pipeline script where i am having problem is gerritReview labels: ['Unit-test': 1]

It is a plain pipeline job not a multibranch pipeline.

Gotcha, that isn’t really the use-case that the Gerrit Code Review plugin has been designed for.

There are some environment variables that the plugin expects to be set:

As you can see, the list is quite big :-(
All of them are automatically set when you run in a multi-branch pipeline, otherwise you may need to set them manually.

One question: what type of Git SCM source URL are you using?
Git/HTTP or Git/SSH?

Can you share the settings?

Luca.


I know that the Gerrit Trigger Plugin sets some of them, but you should cross-check them.

HTH

Luca.




On Wed, Mar 10, 2021 at 3:39 PM Luca Milanesio <[hidden email]> wrote:


On 10 Mar 2021, at 14:35, Ali Raza <[hidden email]> wrote:

Yes, I have added SCM credentials to my pipeline settings. Inside repository URL I also have ''/a/'' prefix. 

Cool, and you confirm that the clone works as expected.


Do i need to add SSH keys which I have added to 'gerrit trigger' plugin settings somewhere inside Gerrit server?

Why do you use the Gerrit Trigger plugin? Isn’t this a multi-branch pipeline?

Luca.



On Wednesday, 10 March 2021 at 15:19:15 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 13:31, Ali Raza <[hidden email]> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/92a69011-4126-43cb-b8fe-7df9dbaa7328n%40googlegroups.com.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/E810633F-1943-4AD9-A0F7-8A089D728E46%40gmail.com.


--
Regards

Ali Raza Alvi
Software Engineer
Contact No. +46793456480


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/D9854563-C229-4DC8-AC09-C148670B17E5%40gmail.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Ali Raza-2
One thing I forgot to mention is that same job is working on another server with the same setting. When we migrated it to a new server it start having the problem. So all of the environment variables and script were working on the previous server. We have many other jobs which are not using multibranch pipelines that is why it will be bit challenging to move them on multibranch pipeline. 

I am using git/https as a SCM source(https://GERRIT_BASE_URL/a/PROJECT) and passing the username and password inside the credentials.

gerrit.jpg 

On Wednesday, 10 March 2021 at 16:13:11 UTC+1 [hidden email] wrote:

On 10 Mar 2021, at 15:02, Luca Milanesio <[hidden email]> wrote:



On 10 Mar 2021, at 14:58, Ali Raza <[hidden email]> wrote:

Yes, it is triggering on gerrit code changes and cloning the repository as well but when it is trying to execute ' gerritReview' command. The code inside my pipeline script where i am having problem is gerritReview labels: ['Unit-test': 1]

It is a plain pipeline job not a multibranch pipeline.

Gotcha, that isn’t really the use-case that the Gerrit Code Review plugin has been designed for.

There are some environment variables that the plugin expects to be set:

As you can see, the list is quite big :-(
All of them are automatically set when you run in a multi-branch pipeline, otherwise you may need to set them manually.

One question: what type of Git SCM source URL are you using?
Git/HTTP or Git/SSH?

Can you share the settings?

Luca.


I know that the Gerrit Trigger Plugin sets some of them, but you should cross-check them.

HTH

Luca.




On Wed, Mar 10, 2021 at 3:39 PM Luca Milanesio <[hidden email]> wrote:


On 10 Mar 2021, at 14:35, Ali Raza <[hidden email]> wrote:

Yes, I have added SCM credentials to my pipeline settings. Inside repository URL I also have ''/a/'' prefix. 

Cool, and you confirm that the clone works as expected.


Do i need to add SSH keys which I have added to 'gerrit trigger' plugin settings somewhere inside Gerrit server?

Why do you use the Gerrit Trigger plugin? Isn’t this a multi-branch pipeline?

Luca.



On Wednesday, 10 March 2021 at 15:19:15 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 13:31, Ali Raza <[hidden email]> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/92a69011-4126-43cb-b8fe-7df9dbaa7328n%40googlegroups.com.


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/E810633F-1943-4AD9-A0F7-8A089D728E46%40gmail.com.


--
Regards

Ali Raza Alvi
Software Engineer
Contact No. <a href="tel:+46%2079%20345%2064%2080" value="+46793456480" target="_blank" rel="nofollow">+46793456480


--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/58f41d12-ba9e-4e48-a276-3054ab763fd5n%40googlegroups.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Luca Milanesio


On 10 Mar 2021, at 16:12, Ali Raza <[hidden email]> wrote:

One thing I forgot to mention is that same job is working on another server with the same setting. When we migrated it to a new server it start having the problem. So all of the environment variables and script were working on the previous server. We have many other jobs which are not using multibranch pipelines that is why it will be bit challenging to move them on multibranch pipeline. 

I am using git/https as a SCM source(https://GERRIT_BASE_URL/a/PROJECT) and passing the username and password inside the credentials.

I believe the Gerrit Code Review plugin assumes the SCM source is a Gerrit SCM (not Git SCM) and it may fail to access the credentials there.

Luca.


<gerrit.jpg> 

On Wednesday, 10 March 2021 at 16:13:11 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 15:02, Luca Milanesio <luca.mi...@...> wrote:



On 10 Mar 2021, at 14:58, Ali Raza <alira...@...> wrote:

Yes, it is triggering on gerrit code changes and cloning the repository as well but when it is trying to execute ' gerritReview' command. The code inside my pipeline script where i am having problem is gerritReview labels: ['Unit-test': 1]

It is a plain pipeline job not a multibranch pipeline.

Gotcha, that isn’t really the use-case that the Gerrit Code Review plugin has been designed for.

There are some environment variables that the plugin expects to be set:

As you can see, the list is quite big :-(
All of them are automatically set when you run in a multi-branch pipeline, otherwise you may need to set them manually.

One question: what type of Git SCM source URL are you using?
Git/HTTP or Git/SSH?

Can you share the settings?

Luca.


I know that the Gerrit Trigger Plugin sets some of them, but you should cross-check them.

HTH

Luca.




On Wed, Mar 10, 2021 at 3:39 PM Luca Milanesio <luca.mi...@...> wrote:


On 10 Mar 2021, at 14:35, Ali Raza <alira...@...> wrote:

Yes, I have added SCM credentials to my pipeline settings. Inside repository URL I also have ''/a/'' prefix. 

Cool, and you confirm that the clone works as expected.


Do i need to add SSH keys which I have added to 'gerrit trigger' plugin settings somewhere inside Gerrit server?

Why do you use the Gerrit Trigger plugin? Isn’t this a multi-branch pipeline?

Luca.



On Wednesday, 10 March 2021 at 15:19:15 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 13:31, Ali Raza <alira...@gmail.com> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-use...@....
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/92a69011-4126-43cb-b8fe-7df9dbaa7328n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-use...@....
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/E810633F-1943-4AD9-A0F7-8A089D728E46%40gmail.com.


-- 
Regards

Ali Raza Alvi
Software Engineer
Contact No. <a href="tel:+46%2079%20345%2064%2080" value="+46793456480" target="_blank" rel="nofollow" class="">+46793456480



-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/58f41d12-ba9e-4e48-a276-3054ab763fd5n%40googlegroups.com.
<gerrit.jpg>

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/679B51D4-B94D-496D-B051-114A1B091229%40gmail.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Ali Raza-2
I am not getting gerrit option in the dropdown but surprisingly it able to clone the code from repo and jenkins script from another repo both hosted on gerrit. It even is able to build the docker using the jenkins build script.

gerrit.jpg



On Wednesday, 10 March 2021 at 17:23:20 UTC+1 [hidden email] wrote:

On 10 Mar 2021, at 16:12, Ali Raza <[hidden email]> wrote:

One thing I forgot to mention is that same job is working on another server with the same setting. When we migrated it to a new server it start having the problem. So all of the environment variables and script were working on the previous server. We have many other jobs which are not using multibranch pipelines that is why it will be bit challenging to move them on multibranch pipeline. 

I am using git/https as a SCM source(https://GERRIT_BASE_URL/a/PROJECT) and passing the username and password inside the credentials.

I believe the Gerrit Code Review plugin assumes the SCM source is a Gerrit SCM (not Git SCM) and it may fail to access the credentials there.

Luca.


<gerrit.jpg> 

On Wednesday, 10 March 2021 at 16:13:11 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 15:02, Luca Milanesio <[hidden email]> wrote:



On 10 Mar 2021, at 14:58, Ali Raza <[hidden email]> wrote:

Yes, it is triggering on gerrit code changes and cloning the repository as well but when it is trying to execute ' gerritReview' command. The code inside my pipeline script where i am having problem is gerritReview labels: ['Unit-test': 1]

It is a plain pipeline job not a multibranch pipeline.

Gotcha, that isn’t really the use-case that the Gerrit Code Review plugin has been designed for.

There are some environment variables that the plugin expects to be set:

As you can see, the list is quite big :-(
All of them are automatically set when you run in a multi-branch pipeline, otherwise you may need to set them manually.

One question: what type of Git SCM source URL are you using?
Git/HTTP or Git/SSH?

Can you share the settings?

Luca.


I know that the Gerrit Trigger Plugin sets some of them, but you should cross-check them.

HTH

Luca.




On Wed, Mar 10, 2021 at 3:39 PM Luca Milanesio <[hidden email]> wrote:


On 10 Mar 2021, at 14:35, Ali Raza <[hidden email]> wrote:

Yes, I have added SCM credentials to my pipeline settings. Inside repository URL I also have ''/a/'' prefix. 

Cool, and you confirm that the clone works as expected.


Do i need to add SSH keys which I have added to 'gerrit trigger' plugin settings somewhere inside Gerrit server?

Why do you use the Gerrit Trigger plugin? Isn’t this a multi-branch pipeline?

Luca.



On Wednesday, 10 March 2021 at 15:19:15 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 13:31, Ali Raza <alira...@gmail.com> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/92a69011-4126-43cb-b8fe-7df9dbaa7328n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/E810633F-1943-4AD9-A0F7-8A089D728E46%40gmail.com.


-- 
Regards

Ali Raza Alvi
Software Engineer
Contact No. <a href="tel:+46%2079%20345%2064%2080" value="+46793456480" rel="nofollow" target="_blank">+46793456480



-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/973682c2-d161-45f8-97e6-57c87fa33106n%40googlegroups.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Luca Milanesio


On 10 Mar 2021, at 17:19, Ali Raza <[hidden email]> wrote:

I am not getting gerrit option in the dropdown but surprisingly it able to clone the code from repo and jenkins script from another repo both hosted on gerrit. It even is able to build the docker using the jenkins build script.

That is weird: have you installed the “Gerrit Code Review” plugin v0.4.4?

If yes, it should provide a Gerrit SCM and it should be visible in the list of options.

Luca.


<gerrit.jpg>



On Wednesday, 10 March 2021 at 17:23:20 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 16:12, Ali Raza <alira...@...> wrote:

One thing I forgot to mention is that same job is working on another server with the same setting. When we migrated it to a new server it start having the problem. So all of the environment variables and script were working on the previous server. We have many other jobs which are not using multibranch pipelines that is why it will be bit challenging to move them on multibranch pipeline. 

I am using git/https as a SCM source(https://GERRIT_BASE_URL/a/PROJECT) and passing the username and password inside the credentials.

I believe the Gerrit Code Review plugin assumes the SCM source is a Gerrit SCM (not Git SCM) and it may fail to access the credentials there.

Luca.


<gerrit.jpg> 

On Wednesday, 10 March 2021 at 16:13:11 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 15:02, Luca Milanesio <[hidden email]> wrote:



On 10 Mar 2021, at 14:58, Ali Raza <[hidden email]> wrote:

Yes, it is triggering on gerrit code changes and cloning the repository as well but when it is trying to execute ' gerritReview' command. The code inside my pipeline script where i am having problem is gerritReview labels: ['Unit-test': 1]

It is a plain pipeline job not a multibranch pipeline.

Gotcha, that isn’t really the use-case that the Gerrit Code Review plugin has been designed for.

There are some environment variables that the plugin expects to be set:

As you can see, the list is quite big :-(
All of them are automatically set when you run in a multi-branch pipeline, otherwise you may need to set them manually.

One question: what type of Git SCM source URL are you using?
Git/HTTP or Git/SSH?

Can you share the settings?

Luca.


I know that the Gerrit Trigger Plugin sets some of them, but you should cross-check them.

HTH

Luca.




On Wed, Mar 10, 2021 at 3:39 PM Luca Milanesio <[hidden email]> wrote:


On 10 Mar 2021, at 14:35, Ali Raza <[hidden email]> wrote:

Yes, I have added SCM credentials to my pipeline settings. Inside repository URL I also have ''/a/'' prefix. 

Cool, and you confirm that the clone works as expected.


Do i need to add SSH keys which I have added to 'gerrit trigger' plugin settings somewhere inside Gerrit server?

Why do you use the Gerrit Trigger plugin? Isn’t this a multi-branch pipeline?

Luca.



On Wednesday, 10 March 2021 at 15:19:15 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 13:31, Ali Raza <alira...@gmail.com> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/92a69011-4126-43cb-b8fe-7df9dbaa7328n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/E810633F-1943-4AD9-A0F7-8A089D728E46%40gmail.com.


-- 
Regards

Ali Raza Alvi
Software Engineer
Contact No. <a href="tel:+46%2079%20345%2064%2080" value="+46793456480" rel="nofollow" target="_blank" class="">+46793456480



-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-use...@....

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/973682c2-d161-45f8-97e6-57c87fa33106n%40googlegroups.com.
<gerrit.jpg>

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/9E17F8D9-0B9F-43F4-ABDD-C3B362F5CD72%40gmail.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Ali Raza-2
Yes, I am using the  “G errit Code Review” plugin v0.4.4.

gerrit.jpg

On Wed, Mar 10, 2021 at 6:22 PM Luca Milanesio <[hidden email]> wrote:


On 10 Mar 2021, at 17:19, Ali Raza <[hidden email]> wrote:

I am not getting gerrit option in the dropdown but surprisingly it able to clone the code from repo and jenkins script from another repo both hosted on gerrit. It even is able to build the docker using the jenkins build script.

That is weird: have you installed the “Gerrit Code Review” plugin v0.4.4?

If yes, it should provide a Gerrit SCM and it should be visible in the list of options.

Luca.


<gerrit.jpg>



On Wednesday, 10 March 2021 at 17:23:20 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 16:12, Ali Raza <[hidden email]> wrote:

One thing I forgot to mention is that same job is working on another server with the same setting. When we migrated it to a new server it start having the problem. So all of the environment variables and script were working on the previous server. We have many other jobs which are not using multibranch pipelines that is why it will be bit challenging to move them on multibranch pipeline. 

I am using git/https as a SCM source(https://GERRIT_BASE_URL/a/PROJECT) and passing the username and password inside the credentials.

I believe the Gerrit Code Review plugin assumes the SCM source is a Gerrit SCM (not Git SCM) and it may fail to access the credentials there.

Luca.


<gerrit.jpg> 

On Wednesday, 10 March 2021 at 16:13:11 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 15:02, Luca Milanesio <[hidden email]> wrote:



On 10 Mar 2021, at 14:58, Ali Raza <[hidden email]> wrote:

Yes, it is triggering on gerrit code changes and cloning the repository as well but when it is trying to execute ' gerritReview' command. The code inside my pipeline script where i am having problem is gerritReview labels: ['Unit-test': 1]

It is a plain pipeline job not a multibranch pipeline.

Gotcha, that isn’t really the use-case that the Gerrit Code Review plugin has been designed for.

There are some environment variables that the plugin expects to be set:

As you can see, the list is quite big :-(
All of them are automatically set when you run in a multi-branch pipeline, otherwise you may need to set them manually.

One question: what type of Git SCM source URL are you using?
Git/HTTP or Git/SSH?

Can you share the settings?

Luca.


I know that the Gerrit Trigger Plugin sets some of them, but you should cross-check them.

HTH

Luca.




On Wed, Mar 10, 2021 at 3:39 PM Luca Milanesio <[hidden email]> wrote:


On 10 Mar 2021, at 14:35, Ali Raza <[hidden email]> wrote:

Yes, I have added SCM credentials to my pipeline settings. Inside repository URL I also have ''/a/'' prefix. 

Cool, and you confirm that the clone works as expected.


Do i need to add SSH keys which I have added to 'gerrit trigger' plugin settings somewhere inside Gerrit server?

Why do you use the Gerrit Trigger plugin? Isn’t this a multi-branch pipeline?

Luca.



On Wednesday, 10 March 2021 at 15:19:15 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 13:31, Ali Raza <alira...@gmail.com> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/92a69011-4126-43cb-b8fe-7df9dbaa7328n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/E810633F-1943-4AD9-A0F7-8A089D728E46%40gmail.com.


-- 
Regards

Ali Raza Alvi
Software Engineer
Contact No. <a href="tel:+46%2079%20345%2064%2080" value="+46793456480" rel="nofollow" target="_blank">+46793456480



-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/973682c2-d161-45f8-97e6-57c87fa33106n%40googlegroups.com.
<gerrit.jpg>

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/9E17F8D9-0B9F-43F4-ABDD-C3B362F5CD72%40gmail.com.


--
Regards

Ali Raza Alvi
Software Engineer
Contact No. +46793456480

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/CAPAq%2BzsKXf%3DAcvsUU3pGYctYg8YL7Oq6hBa78zCSgxKfNeBTug%40mail.gmail.com.
Reply | Threaded
Open this post in threaded view
|

Re: Gerrit review authentication error

Ali Raza-2
Can it be the problem with the port which the gerrit trigger plugin for ssh?

On Wed, Mar 10, 2021 at 6:28 PM Ali Raza <[hidden email]> wrote:
Yes, I am using the  “G errit Code Review” plugin v0.4.4.

gerrit.jpg

On Wed, Mar 10, 2021 at 6:22 PM Luca Milanesio <[hidden email]> wrote:


On 10 Mar 2021, at 17:19, Ali Raza <[hidden email]> wrote:

I am not getting gerrit option in the dropdown but surprisingly it able to clone the code from repo and jenkins script from another repo both hosted on gerrit. It even is able to build the docker using the jenkins build script.

That is weird: have you installed the “Gerrit Code Review” plugin v0.4.4?

If yes, it should provide a Gerrit SCM and it should be visible in the list of options.

Luca.


<gerrit.jpg>



On Wednesday, 10 March 2021 at 17:23:20 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 16:12, Ali Raza <[hidden email]> wrote:

One thing I forgot to mention is that same job is working on another server with the same setting. When we migrated it to a new server it start having the problem. So all of the environment variables and script were working on the previous server. We have many other jobs which are not using multibranch pipelines that is why it will be bit challenging to move them on multibranch pipeline. 

I am using git/https as a SCM source(https://GERRIT_BASE_URL/a/PROJECT) and passing the username and password inside the credentials.

I believe the Gerrit Code Review plugin assumes the SCM source is a Gerrit SCM (not Git SCM) and it may fail to access the credentials there.

Luca.


<gerrit.jpg> 

On Wednesday, 10 March 2021 at 16:13:11 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 15:02, Luca Milanesio <[hidden email]> wrote:



On 10 Mar 2021, at 14:58, Ali Raza <[hidden email]> wrote:

Yes, it is triggering on gerrit code changes and cloning the repository as well but when it is trying to execute ' gerritReview' command. The code inside my pipeline script where i am having problem is gerritReview labels: ['Unit-test': 1]

It is a plain pipeline job not a multibranch pipeline.

Gotcha, that isn’t really the use-case that the Gerrit Code Review plugin has been designed for.

There are some environment variables that the plugin expects to be set:

As you can see, the list is quite big :-(
All of them are automatically set when you run in a multi-branch pipeline, otherwise you may need to set them manually.

One question: what type of Git SCM source URL are you using?
Git/HTTP or Git/SSH?

Can you share the settings?

Luca.


I know that the Gerrit Trigger Plugin sets some of them, but you should cross-check them.

HTH

Luca.




On Wed, Mar 10, 2021 at 3:39 PM Luca Milanesio <[hidden email]> wrote:


On 10 Mar 2021, at 14:35, Ali Raza <[hidden email]> wrote:

Yes, I have added SCM credentials to my pipeline settings. Inside repository URL I also have ''/a/'' prefix. 

Cool, and you confirm that the clone works as expected.


Do i need to add SSH keys which I have added to 'gerrit trigger' plugin settings somewhere inside Gerrit server?

Why do you use the Gerrit Trigger plugin? Isn’t this a multi-branch pipeline?

Luca.



On Wednesday, 10 March 2021 at 15:19:15 UTC+1 luca.mi...@gmail.com wrote:

On 10 Mar 2021, at 13:31, Ali Raza <alira...@gmail.com> wrote:

  Hi
I am using the Gerrit trigger plugin with Jenkins which is working fine but along with it i am also using the Gerrit Code Review plugin. I am calling 'gerrit review' command inside my pipeline script but getting an error 'Gerrit Review requires authentication, however there are no credentials defined or are empty'

Have you defined the credentials in the Gerrit SCM connection in the multi-branch pipeline job?
Also remember to use the ‘/a/‘ prefix for the Gerrit SCM URL, otherwise the access won’t be authenticated.

Example:

HTH

Luca.



I am not sure from where the Gerrit review is getting the credentials. On the other hand, the Gerrit trigger plugin is getting triggered and executing the build process but when it reaches the 'gerrit review' command it is having an authentication error.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/96f09b40-b415-4e18-969f-89d4915bec36n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/92a69011-4126-43cb-b8fe-7df9dbaa7328n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/E810633F-1943-4AD9-A0F7-8A089D728E46%40gmail.com.


-- 
Regards

Ali Raza Alvi
Software Engineer
Contact No. <a href="tel:+46%2079%20345%2064%2080" value="+46793456480" rel="nofollow" target="_blank">+46793456480



-- 
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/973682c2-d161-45f8-97e6-57c87fa33106n%40googlegroups.com.
<gerrit.jpg>

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/9E17F8D9-0B9F-43F4-ABDD-C3B362F5CD72%40gmail.com.


--
Regards

Ali Raza Alvi
Software Engineer
Contact No. +46793456480


--
Regards

Ali Raza Alvi
Software Engineer
Contact No. +46793456480

--
You received this message because you are subscribed to the Google Groups "Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [hidden email].
To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/CAPAq%2BzvPXY11RTdZD9QVNybx91PkohdaQkV%2BgsFFS3misWsEBA%40mail.gmail.com.